Well……. We where so busy and it was cold outside so we have put some color to the body.

Everything is on scale!!!!!!!!

The stripes, the location of the rear lights (although looks not to scale) the tires, the suspension, the roll bar, the mirrors.

Even the rear tires has the camber included.

Need to say that looking to the small capabilities of AutoCAD for this kinds of drawing, it looks wonderful for me!!!!!!!!!

My Belgium friend told me, why you don’t use LightWave to make 3D renderings?

So I have give a shot to see the possibilities.

I need to say that the first day’s you need to learn a lot, but with some time and work you can get nice results.

As you can see from the next pictures, we are at the good direction.

But this doesn’t mean that we are capable to modeling, this would be the next step.

We have started with modeling, make a copy of my “Image” wheels and we start to have some fun.

COBRA289

Knowledge shared with others will result in Progress.

The AC Cobra Replica Site

People that have visited this page from 20-Dec.-03

Home | About Me | Photo Gallery 01 | Engine 01 | Engine 02 | Heads “AFR” | Heater Solution | 2D & 3D Pictures | Brakes-01 | Brakes-02 | Safety Belts | Clutch (Calculations) | Drawings | DIY PROM | Alignment 01 | Alignment 02 | Alignment 03 | Wiring 01 | Wiring 02

Revised at 14 - June.-2007